View BSP60_4651571.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
handbook, halfpage
M3D087
BSP60; BSP61; BSP62 PNP Darlington transistors
Product data sheet Supersedes data of 1999 Apr 29 2001 May 31
NXP Semiconductors
Product data sheet
PNP Darlington transistors
FEATURES * High current (max. 0.5 A) * Low voltage (max. 80 V) * Integrated diode and resistor. APPLICATIONS * Industrial switching applications such as: - Print hammer - Solenoid - Relay and lamp drivers. DESCRIPTION PNP Darlington transistor in a SOT223 plastic package. NPN complements: BSP50, BSP51 and BSP52.
1 Top view 2 4
BSP60; BSP61; BSP62
PINNING PIN 1 2, 4 3 base collector emitter DESCRIPTION
2, 4 1
3
MAM266
3
Fig.1 Simplified outline (SOT223) and symbol.
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO BSP60 BSP61 BSP62 VCES collector-emitter voltage BSP60 BSP61 BSP62 VEBO IC ICM IB Ptot Tstg Tj Tamb Note 1. Device mounted on a printed-circuit board, single sided copper, tinplated, mounting pad for collector 1 cm2. For other mounting conditions, see "Thermal considerations for the SOT223 in the General Part of associated Handbook". emitter-base voltage collector current (DC) peak collector current base current (DC) total power dissipation storage temperature junction temperature operating ambient temperature Tamb 25 C; note 1 open collector VBE = 0 - - - - - - - - -65 - -65 -45 -60 -80 -5 -1 -2 -100 1.25 +150 150 +150 V V V V A A mA W C C C PARAMETER collector-base voltage CONDITIONS open emitter - - - -60 -80 -90 V V V MIN. MAX. UNIT
2001 May 31
2
NXP Semiconductors
Product data sheet
PNP Darlington transistors
THERMAL CHARACTERISTICS SYMBOL Rth j-a Rth j-s Note PARAMETER thermal resistance from junction to ambient thermal resistance from junction to solder point
BSP60; BSP61; BSP62
CONDITIONS note 1
VALUE 98 17
UNIT K/W K/W
1. Device mounted on a printed-circuit board, single sided copper, tinplated, mounting pad for collector 1 cm2. For other mounting conditions, see "Thermal considerations for the SOT223 in the General Part of associated Handbook". CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL ICES PARAMETER collector cut-off current BSP60 BSP61 BSP62 IEBO hFE emitter cut-off current DC current gain VBE = 0; VCE = -45 V VBE = 0; VCE = -60 V VBE = 0; VCE = -80 V IC = 0; VEB = -4 V VCE = -10 V; note 1; see Fig.2 IC = -150 mA IC = -500 mA VCEsat collector-emitter saturation voltage base-emitter saturation voltage transition frequency IC = -500 mA; IB = -0.5 mA IC = -500 mA; IB = -0.5 mA; Tj = 150 C IC = -500 mA; IB = -0.5 mA IC = -500 mA; VCE = -5 V; f = 100 MHz ICon = -500 mA; IBon = -0.5 mA; IBoff = 0.5 mA 1 000 2 000 - - - - - - - - - 200 - - -1.3 -1.3 -1.9 - V V V MHz - - - - - - - - -50 -50 -50 -50 nA nA nA nA CONDITIONS MIN. TYP. MAX. UNIT
VBEsat fT
Switching times (between 10% and 90% levels); see Fig.3 ton toff Note 1. Pulse test: tp 300 s; 0.02. turn-on time turn-off time - - 400 1 500 - - ns ns
2001 May 31
3
NXP Semiconductors
Product data sheet
PNP Darlington transistors
BSP60; BSP61; BSP62
handbook, full pagewidth
6000
MGD839
hFE 5000
4000
3000
2000
1000
0 -10-1
-1
-10
-102
IC (mA)
-103
VCE = -10 V.
Fig.2 DC current gain; typical values.
handbook, full pagewidth
VBB
VCC
RB (probe) oscilloscope 450 Vi R1 R2
RC Vo (probe) 450 DUT oscilloscope
MGD624
Vi = -10 V; T = 200 s; tp = 6 s; tr = tf 3 ns. R1 = 56 ; R2 = 10 k; RB = 10 k; RC = 18 . VBB = 1.8 V; VCC = -10.7 V. Oscilloscope: input impedance Zi = 50 .
Fig.3 Test circuit for switching times.
2001 May 31
4
NXP Semiconductors
Product data sheet
PNP Darlington transistors
PACKAGE OUTLINE
BSP60; BSP61; BSP62
Plastic surface mounted package; collector pad for good heat transfer; 4 leads
SOT223
D
B
E
A
X
c y HE b1 vMA
4
Q A A1
1
e1 e
2
bp
3
wM B detail X
Lp
0
2 scale
4 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.8 1.5 A1 0.10 0.01 bp 0.80 0.60 b1 3.1 2.9 c 0.32 0.22 D 6.7 6.3 E 3.7 3.3 e 4.6 e1 2.3 HE 7.3 6.7 Lp 1.1 0.7 Q 0.95 0.85 v 0.2 w 0.1 y 0.1
OUTLINE VERSION SOT223
REFERENCES IEC JEDEC EIAJ SC-73
EUROPEAN PROJECTION
ISSUE DATE 97-02-28 99-09-13
2001 May 31
5
NXP Semiconductors
Product data sheet
PNP Darlington transistors
DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes PRODUCT STATUS(2) Development Qualification Production
BSP60; BSP61; BSP62
DEFINITION This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.
2001 May 31
6
NXP Semiconductors
Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors. No changes were made to the content, except for the legal definitions and disclaimers.
Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com
(c) NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands 613514/05/pp7 Date of release: 2001 May 31 Document order number: 9397 750 07906

▲Up To Search▲

Price & Availability of BSP60

	To Download BSP60 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .